Posts by DrSteve

HI

When i try to save data from an other PACS using import function, I am getting following errors.

IMages on Disk are stored option selected is Lsssy JPEG [PACS] Warn[CompressJPEGImage]: JPEG changed to lossless (J1) for 16 bits data

and also this one error when IMages on Disk are stored option uncompressed

[PACS] ***Item Length exceeds remainder file size: 00003832
[PACS] ***[AddImageFile] D:\DICOM_DATA\incoming\003a7189-d873-4675-8673-d38fc26a0c1a -FAILED: Error on Load
[PACS] ***Item Length exceeds remainder file size: 00003832
[PACS] ***[AddImageFile] D:\DICOM_DATA\incoming\003a7189-d873-4675-8673-d38fc26a0c1a -FAILED: Error on Load
[PACS] ***Item Length exceeds remainder file size: 00003832
[PACS] ***[AddImageFile] D:\DICOM_DATA\incoming\003a7189-d873-4675-8673-d38fc26a0c1a -FAILED: Error on Load
[PACS] ***Item Length exceeds remainder file size: 00003832
[PACS] ***[AddImageFile] D:\DICOM_DATA\incoming\003a7189-d873-4675-8673-d38fc26a0c1a -FAILED: Error on Load

and also

PACS] OpenJP2 decompress started.
[PACS] Debug[OpenJP2 decompress]: H = 512, W = 512, Bits = 16 in 16, Components = 1, Frames = 1
[PACS] Info[OpenJP2(J2k)]: Start to read j2k main header (0).
[PACS] Info[OpenJP2(J2k)]: Main header has been correctly decoded.
[PACS] Info[OpenJP2(J2k)]: Stream reached its end !
[PACS] Info[OpenJP2(J2k)]: Header of tile 0 / 0 has been read.
[PACS] ***[OpenJP2(J2k)]: Failed to decode.
[PACS] ***[OpenJP2(J2k)]: Failed to decode tile 1/1
[PACS] ***[OpenJP2 decompress]: Jpeg 2K code stream did not decode.
[PACS] ***[DecompressImage]: failed to decompress JP2000
[PACS] Query Tables: DICOMImages
[PACS] Columns : ObjectFile, DeviceName
[PACS] Where : SOPInstanc = '1.2.840.113619.2.398.3.279763978.624.1580489949.8.657' AND ImagePat = 'xxxxxxxx'
[PACS] Order : (null)
[PACS] FreeStore Left 2608780 on D:\
[PACS] Add to Table: DICOMImages
[PACS] Columns: SOPInstanc, SOPClassUI, ImageNumbe, ImageDate, ImageTime, AcqDate, AcqTime, AcqNumber, SliceLocat, SamplesPer, PhotoMetri, QRows, QColumns, BitsStored, ImageType, ImagePat, SeriesInst, AccessTime, ObjectFile, DeviceName
[PACS] Values: '1.2.840.113619.2.398.3.279763978.624.1580489949.8.657', '1.2.840.10008.5.1.4.1.1.2', '657', '20200213', '105656', '20200213', '104803.951359', '1', '-412.750', '1', 'MONOCHROME2', '512', '512', '16', 'ORIGINAL\\SECONDARY\\AXIAL', 'xxxxxxxxxxxxxx', '1.2.840.113619.2.398.3.279763978.624.1580489949.6', 1767130240, 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\\03020037.dcm', 'MAG0'
[PACS] Query Tables: DICOMSeries
[PACS] Columns : SeriesInst,SeriesNumb,SeriesDate,SeriesTime,SeriesDesc,Modality,PatientPos,ContrastBo,Manufactur,ModelName,BodyPartEx,ProtocolNa,StationNam,Institutio,FrameOfRef,SeriesPat,StudyInsta
[PACS] Where : SeriesInst = '1.2.840.113619.2.398.3.279763978.624.1580489949.6' AND SeriesPat = 'BIHL-82830'
[PACS] Order : (null)
[PACS] Add to Table: DICOMSeries
[PACS] Columns: SeriesInst, SeriesNumb, SeriesDate, SeriesTime, SeriesDesc, Modality, PatientPos, Manufactur, ModelName, ProtocolNa, StationNam, Institutio, FrameOfRef, SeriesPat, StudyInsta, AccessTime
[PACS] Values: '1.2.840.113619.2.398.3.279763978.624.1580489949.6', '302', '20200213', '105552', 'ARTERIAL PHASE.625MM', 'CT', 'HFS', 'GE MEDICAL SYSTEMS', 'Optima CT660', '26.1 Abdomen Pelvis 0.8s 5mm SmartmA', 'ctbay99', 'xxxxxxxxxxxxxxxxxxxxxx', '1.2.840.113619.2.398.3.279763978.78.1580452317.954.11355.1', 'BIHL-82830', '1.2.840.113619.2.398.3.279763978.78.1580452317.953', 1767130240
[PACS] Query Tables: DICOMStudies
[PACS] Columns : StudyInsta,StudyDate,StudyTime,StudyID,StudyDescr,AccessionN,ReferPhysi,PatientsAg,PatientsWe,StudyModal,PatientNam,PatientBir,PatientSex,Softwarevs,DeviceSeri,Manufactur,ModelName,BodyPartEx,ProtocolNa,StationNam,Institutio,StudyYear,StudyMonth,status,HOSPID,PatientID
[PACS] Where : StudyInsta = '1.2.840.113619.2.398.3.279763978.78.1580452317.953'
[PACS] Order : (null)
[PACS] Add to Table: DICOMStudies
[PACS] Columns: StudyInsta, StudyDate, StudyTime, StudyID, StudyDescr, AccessionN, ReferPhysi, PatientsAg, StudyModal, PatientNam, PatientBir, PatientSex, Softwarevs, DeviceSeri, Manufactur, ModelName, ProtocolNa, StationNam, Institutio, StudyYear, StudyMonth, PatientID, AccessTime
[PACS] Values: '1.2.840.113619.2.398.3.279763978.78.1580452317.953', '20200213', '104336', '4690', 'CT ANGIOGRAM RENAL', '4136516', '^Dr.xxxxx', '032Y', 'CT', 'xxxxxxx', '19880213', 'M', 'cj2_5m3sp4.5', '*', 'GE MEDICAL SYSTEMS', 'Optima CT660', '26.1 Abdomen Pelvis 0.8s 5mm SmartmA', 'ctbay99', 'xxxxxxxxxxxxxxxx', '2020', 'Feburary', 'BIHL-82830', 1767130240
[PACS] Query Tables: DICOMPatients
[PACS] Columns : PatientID,PatientNam,PatientBir,PatientSex
[PACS] Where : PatientID = 'xxxxxxxxxxxxxx'
[PACS] Order : (null)
[PACS] Add to Table: DICOMPatients
[PACS] Columns: PatientID, PatientNam, PatientBir, PatientSex, AccessTime
[PACS] Values: 'BIHL-82830', 'xxxxx', '19880213', 'M', 1767130240
[PACS] Added file: D:\DICOM_DATA\xxxxxxxxxxxxxxxxxxxxxx\03020037.dcm

and when i try to view this image xxxx its just a black nothing else Server log is

PACS] UPACS THREAD 34: STARTED AT: Wed Dec 31 02:34:45 2025
[PACS] Calling Application Title : "RADIANT "
[PACS] Called Application Title : "PACS "
[PACS] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384
[PACS] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.1" 1
[PACS] (StudyRootQuery) search level: STUDY
[PACS] C-Find (StudyRoot) located 1 records
[PACS] UPACS THREAD 34: ENDED AT: Wed Dec 31 02:34:45 2025
[PACS] UPACS THREAD 34: TOTAL RUNNING TIME: 0 SECONDS
[PACS]
[PACS] UPACS THREAD 35: STARTED AT: Wed Dec 31 02:34:47 2025
[PACS] Calling Application Title : "RADIANT "
[PACS] Called Application Title : "PACS "
[PACS] Application Context : "1.2.840.10008.3.1.1.1", PDU length: 16384
[PACS] Presentation Context 0 "1.2.840.10008.5.1.4.1.2.2.2" 1
[PACS] C-Move Destination: "RADIANT "
[PACS] Number of Images to send: 1
[PACS] Sending file : D:\DICOM_DATA\xxxxxxxxxxxxxxxxxxx\03020037.dcm
[PACS] ***[OpenJP2(J2k)]: Failed to decode.
[PACS] ***[OpenJP2(J2k)]: Failed to decode tile 1/1
[PACS] ***[OpenJP2 decompress]: Jpeg 2K code stream did not decode.
[PACS] ***[DecompressImage]: failed to decompress JP2000
[PACS] C-Move (StudyRoot)
[PACS] UPACS THREAD 35: ENDED AT: Wed Dec 31 02:34:47 2025
[PACS] UPACS THREAD 35: TOTAL RUNNING TIME: 0 SECONDS

But If i try to import the same image in a Radiant Viewer I can see the scan. This is happening with lots of Scans that i am trying to import

Can you please guide me

Thanks. let me give it a try

Previously I had both versions. I uninstalled and check with both one by ne but no success

Yes its installed...

Is there any way by clicking all required dependencies can be installed???

Can you guide how to fix them

Hi Marcel

I downgraded to lower version that is 8.0. BUt the error is same. Even using your shared dll.

Quote from marcelvanherk

Hi,

I used exactly these commands to delete the old driver and copy the new - and then configure conquest:

del c:\dicomserver\libmysql64.dll

copy "C:\Program Files\MySQL\MySQL Server 8.0\lib\libmysql.dll" c:\dicomserver

del c:\dicomserver\dicom.ini

conquestdicomserver.exe

Then select native mysql driver, save settings, make mysql database, 'conquest', root password.

Then the database can be regenerated.

Marcel

Display More

Hi Marcel

I followed the above mentioned steps and got the following error

Can you guide where i am wrong

Let me test and update you

Marcel do I need to rename the file also???

As I had shared my testing results with you. Can you guide me

Thanks. I will test and update you.

I need to delete the dll files from co quest root folder as well as from install64 folder and copy the dll files from mysql router lib folder.

As I only install the database not the router.

Yes first option....

If you chose the second option, then installation is fine.

Thanks Marcel. Appreciate iate your efforts and waiting for your response

Quote from marcelvanherk

Yes, you do need to copy libmysql.dll from your mysql folder as libmysql64.dll in your conquest folder. I am not aware it needs further files, but it may.

One last clarification, conquest folder only or in install64 folder only or in both. As as per your last comments only in Install64.

Then what about libmysql64.dll that was generated as a result of setup. Will that automatically be updated from install64 folder 🤔

Please correct me if i am wrong, only at this location file need to be placed??

And after running the setup, choosing driver and saving the basic AE and port details , I replace file here and then move to database tab or just close the setup replace file and continue

I copied both dll and lib files during the installation process as I me turned above in install 32 as well as Install64 and root directory where conquest.exe sits but still same error

Thanks for prompt response. I installed Mysql database only but no via Xampp. After extracting the pacs setup there is no dll file so I just run the exe file choose myself database driver. Enter pacs ae and port save and close the application. I copy paste the dll and lib file from myself 8.0.4 library folder to pacs root directory and then run the application and try to create the database and also delete the dll and paste from myself database and rename it but still got the same error.

Can you guide the setups that I am performing wrong

Hi

Before installing the conquest,

1) I rename the libmysql64.dll with libmysql.dll by replace the file from Mysql 8.0 lib folder. But got the error

2) Let the libmysql64.dll there and copy the libmysql.dll file but again got the error.

3) Let the libmysql64.dll there and copy the libmysql.dll file and also replace the same lib file in install32 and install 64 folders but again got the error.

Server log

------------------ Start (ODBC) data source update or creation --------------------
waiting ..
waiting ..
waiting ..
waiting ..
waiting ..
waiting ..
waiting ..
waiting ..
[CONQUESTSRV1] ***Cannot connect to MySQL on port 3306
[CONQUESTSRV1] ***MySQL Error message: Client does not support authentication protocol requested by server; consider upgrading MySQL client
[CONQUESTSRV1] ----------------------------------
------------------- End data source update or creation --------------------

Can somebody guide me in this regard.

Steve

Okie. I will test and update you

Okie. I have PACS server up and running. How can I made it to act as print server

Thanks for your prompt response.

Can you guide me how to make conquest act as DICOM print server and automatically prints film